Model 9230 operators are designed to operate very heavy vehicular slide gates in limited (Class III) and restricted (Class IV) applications only.   These operators should never be used in applications serving the general public.   These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications.   Center mounting the operator requires an optional pedestal mounting base. This operator includes a speed control module which allows the user to set the speed of the gate from 1/2 to 2 feet/sec., and provides slow-start and slow-stop functions as well.

• Maximum gate length 100-feet.
• Maximum gate weight 5000 pounds*.   (*Assumes gate is on level ground, in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator.)
• 40:1 gear reduction running in a continuous oil bath.
• 3 HP continuous-duty motor.
• 208, 230 VAC three-phase only.
• Operator is shipped with chain brackets and 20-feet of #60 chain.
• Class III and IV applications only.
• Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
• Dimensions: 16"W x 34"H x 16"D

• Speed control module.
• Direct driven limit nuts.
• Anti-tailgating feature.
• Adjustable mid-stop.
• Gate tracker reporting output.
• Ports for plug-in loop detectors.
• Two convenience outlets.
• Fail-secure operation includes crank for manual operation.
• Programming switches.
• Built-in reset switch.
• Built-in power On/Off switch.