Click here for manuals/cutsheets.
600 Series

The 600 Series is a residential and medium-duty commercial operator for applications that require 100 cycles per hour or less. It is ideal for uses that do not require continuous duty.

The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must make contact with an obstruction that causes them to stop, both when closing and opening. The 600 Series travels at normal speed until it reaches the last 5 to 10 degrees of travel. It then automatically slows, negating the need for positive stops.

Hydraulic locks in both the open and closed positions. For gates greater than 12 feet in length, electric locks are recommended.

In some states and cities (in case of a power outage), the gate must be able to be pushed open by the fire ore emergency vehicle. We can take out the hydraulic check valve in the closed position. You must then use an electric lock to keep the gate closed.

With the operator mounted inside the property, the operator can be installed to swing inward or outward. Most mechanical operators must be mounted on the side the gate will swing toward.